DUE SEPT 28, 2012
For this exercise, we will explore a few additional tools for creating models. The bridge contains several elements; the beams, decking, railings, etc. The revolve tool can be used effectively to model the beams, the decking and the curved railings. Duplicate a single railing post and scale it as necessary to model the remaining posts. Clone the posts to create the second set on the backside of the bridge.
Model large flat stones that would support the bridge at the ends. Use a flat plane below to model the bed of the stream. It doesn't have to look exactly like the first image, but the flat stones should extend on either side of the bridge. These flat stones should have a natural appearance with curved linear edges.
Additionally, model a large rock similar to the one in the third image. Starting with a sphere, use the sculpt tool and soft-select tools. Place this rock near the base of the bridge on the left. Be sure to smooth each of your models with the number "3" key.
Do not indicate any colors or textures for the model.
Turn-in the .ma file to the vist284 Dropbox folder.
The grades will be determined according to the following:
Model Proportions and scale | 30% |
Modeling Detail and appearance | 30% |
Completeness/Meeting Program Requirements | 20% |
Timeliness of Hand in | 0% |
When is this due?
ReplyDelete